BJLJY - SULFUR HEXAFLUORIDE,LIQ GAS,UNDER PRESSURE
- MSDS: BJLJY
- Manufacturer: UNION CARBIDE CORP LINDE DIV
- Product Name: SULFUR HEXAFLUORIDE,LIQ GAS,UNDER PRESSURE
- National Stock Number: 6830-00-817-2342
Product Identification
Product ID:SULFUR HEXAFLUORIDE,LIQ GAS,UNDER PRESSURE
MSDS Date:01/01/1987
FSC:6830
NIIN:00-817-2342
MSDS Number: BJLJY
Responsible Party
DANBURY, CT 06817-0001
US
Emergency Phone: 800-822-4357/304-744-3487
Info Phone: 800-822-4357
Cage: 61637
Contractor
Telephone: 800-822-4357/732-563-5522 (MSDS)
Cage: 61637
Ingredients
SULFUR HEXAFLUORIDE
CAS: 2551-62-4
RTECS: WS4900000
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM; 9192
Hazards
LD50 LC50 Mixture:INTRAVENOUS RABBIT;LD50 IS 5790 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE-EYES:LIQUID,
FROSTBITE.SKIN:LIQUID, FROSTBITE.INHALATION:LOW OXYGEN IN
BLOOD(ASPHYXIATION).CHRONIC:NONE SPECIFIED BY MANUFACTURER.
Explanation of Carcinogenicity:NONE OF THE COMPOUNDS IN THIS PRODUCT IS
LISTED BY IARC, NTP, OR OSHA AS A CARCINOGEN.
Effects of Overexposure:EYE & SKIN CONTACT WITH LIQUID MAY CAUSE
FROSTBITE.INHALATION MAY CAUSE ASPHYXIATION.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:EYE:FLUSH W/WATER 15 MIN,HOLD LIDS OPEN.CALL A
DOCTOR.SKIN:WARM FROSTBITE AREA WITH WARM WATER(NOT TO EXCEED
112F).DO NOT RUB THE FROZEN PART EITHER BEFORE OR AFTER
REWARMING.THE PATIENT SHOULD NOT SM OKE,NOR DRINK ALCOHOL.KEEP WARM
AT REST.CALL A PHYSICIAN.INHALED:REMOVE TO FRESH AIR.GIVE
CPR/OXYGEN IF NECESSARY.CALL A DOCTOR.INGESTION:CALL A PHYSICIAN.
Fire Fighting
Extinguishing Media:SULFUR HEXAFLUORIDE CANNOT CATCH FIRE. USE MEDIA
APPROPRIATE FOR SURROUNDING FIRE.
Fire Fighting Procedures:EVACUATE ALL PERSONNEL FROM DANGER
AREA.IMMEDIATELY DELUGE CONTAINERS WITH WATER SPRAY FROM MAXIMUM
DISTANCE UNTIL COOL,THEN MOVE CONTAINERS AWAY FROM FIRE AREA
Unusual Fire/Explosion Hazard:CONTAINERS MAY RUPTURE DUE TO HEAT OF
FIRE.CONTAINER SHOULD NOT BE KEPT AT A TEMPERATURE HIGHER THAN
125F.MOST CONTAINERS HAVE PRESSURE RELIEF DEVICES TO VENT.
Accidental Release
Spill Release Procedures:EVACUATE ALL PERSONNEL FROM DANGER AREA.USE
SELF-CONTAINED BREATHING APPARATUS WHERE NEEDED.SHUT OFF LEAK IF
WITHOUT RISK.VENTILATE AREA.
Neutralizing Agent:NONE
Handling
Handling and Storage Precautions:STORE IN A COOL,DARK,WELL VENTILATED
AREA.KEEP CONTAINERS TIGHTLY CLOSED.NEVER WORK ON A PRESSURIZED
SYSTEM.IF THERE IS A LEAK,RELEASE PRESSURE FIRST.
Other Precautions:CAUTION:HIGH PRESSURE LIQUEFIED GAS.CAN CAUSE RAPID
SUFFOCATION.THIS GAS IS HEAVIER THAN AIR.IT DISPLACES AIR UPWARD
AND CREATES AN OXYGEN-DEFICIENT ATMOSPHERE.VENTILATE SPACE BEFORE
ENTRY.VERIFY SUFF ICIENT OXYGEN CONCENTRATION.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS. SEE 29 CFR
1910.134 FOR REGULATIONS PERTAINING TO RESPIRATOR USE.
Ventilation:LOCAL EXHAUST IS PREFERRED. MECHANICAL (GENERAL) IS
ACCEPTABLE.
Protective Gloves:NEOPRENE
Eye Protection:FULL FACE SHIELD AND SAFETY GLASSES
Other Protective Equipment:METATARSAL SHOES FOR CYLINDER HANDLING.EYE
WASH STATION AND SAFETY SHOWER.
Work Hygienic Practices:USE GOOD CHEMICAL HYGIENE PRACTICE. AVOID
UNNECESSARY CONTACT.
Supplemental Safety and Health
Chemical Properties
HCC:G3
Boiling Pt:B.P. Text:-83F,-64C
Melt/Freeze Pt:M.P/F.P Text:-59F,-51C
Vapor Pres:16550
Vapor Density:5.11
Evaporation Rate & Reference:HIGH (N-BUTYL ACETATE=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:COLORLESS, ODORLESS
Percent Volatiles by Volume:100
Stability
Stability Indicator/Materials to Avoid:YES
INERT UNDER NORMAL USE
Stability Condition to Avoid:HIGH TEMPERATURE AND FLAME
Hazardous Decomposition Products:NONE EXPECTED UNDER CONDITIONS OF
ANTICIPATED USE.
Disposal
Waste Disposal Methods:DISPOSE I/A/W ALL FEDERAL, STATE AND LOCAL
REGULATIONS. PREVENT WASTE FROM CONTAMINATING SURROUNDING
ENVIRONMENT.KEEP PERSONNEL AWAY. CALL SUPPLIER FOR DISPOSAL
INFORMATION.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.